Welcome to our online shop
Expression AV is the online store of Expression MediaEverything you need to complete your audio visual project - from a single connector through to a fully integrated audio visual system. An online AV supermarket for the professional installer, the dedicated enthusiast or the system operator.
All the products listed are of high quality and carry a full warranty. There are no grey imports, no second-hand or ex-demo equipment - everything is brand new and boxed so you can buy with confidence!
We also provide outstanding technical support and information to enable you to carry out your project, secure in the knowledge that you have the support of industry professionals and experienced installation engineers.
Please do not hesitate to call us to discuss your requirements.
Telephone : 01457 899100.
Installation & Servicewww.expressionmedia.co.uk
Since the companies founding in 2003, one of our key areas of business has been induction loop systems. From standard perimeter loops through to low-spill phased arrays. www.inductionloop.org
Churches are a market like no other. They way they use their systems and the equipment needed, along with challenging building designs and often less-than-ideal acoustic spaces requires a specialist company to ensure results which are effective, but not intrusive. www.soundadviceforchurches.co.uk
A1706 60W Mixer Amplifier
The TOA A-1700 Series of high-performance mixing-dedicated power amplifiers are ideal for public address PA applications such as places of worship and meeting halls with either a low impedance music system or a 100 volt line distributed sound sytem .
The TOA A1706 benefits from 2 zones with 4 mic inputs, 3 aux inputs and 2 further mic/aux inputs.
Optional rack mount brackets available - MB-25B
||240 V AC, 50/60 Hz|
|Rated Output:||60 W|
|Power/Current Consumption:||150 W (rated output), 60 W (EN60065), under 150 mA (when power switch is OFF)|
|Frequency Response:||50 - 20,000 Hz (±3 dB)|
|Distortion:||Under 2% at 1 kHz, rated power|
MIC 1 - 6: -60 dB*, 600 Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack
AUX 1 - 2: -20 dB*, 600 Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack (Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)
AUX 3 - 4: -20 dB*, 10 kΩ, unbalanced, RCA pin jack
AUX 5: -20 dB*, 10 kΩ, unbalanced, combined type of XLR-3-31 equivalent and phone jack
PWR AMP IN: 0 dB*, 600 Ω, unbalanced,
RCA pin jack (An equalizer or other signal processor connectable between LINE OUT and PWR AMP IN terminals)
REC: 0 dB*, 600 Ω, unbalanced, RCA pin jack
LINE: 0 dB*, 600 Ω, unbalanced, RCA pin jack
SPEAKER SELECTOR: 2 zone, high impedance (100 V line/167 Ω), individual selector key, M4 screw terminal
DIRECT SPEAKER OUT:
High impedance (100 V line/167 Ω), M4 screw terminal
Low impedance: (4 - 16 Ω), M4 screw terminal (Both Low and High impedance terminals cannot be used at the same time.)
|Phantom Power:||ON or OFF for each MIC1 - 6 with switch setting|
(Band Pass : 20 - 20,000 Hz)
|Over 100 dB (Master volume: min)|
|Over 76 dB (Master volume: max)|
|Over 60 dB (MIC 1 - MIC 4)|
|Over 53 dB (MIC 5, MIC 6)|
|Over 76 dB (AUX 1 - AUX 5)|
|Tone Control:||Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz|
|Control Input:||REMOTE VOLUME: M3 screw terminal|
|POWER REMOTE:||No-voltage make contact input, open voltage: 28 V DC (when the unit's power is OFF), short-circuit: under 10 mA, M3 screw terminal|
|Indicator:||5 point LED output level meter, Power indicator LED, Zone indicator LED|
|Operating Temperature:||-10℃ to +40℃|
|Finish:||Panel: ABS resin, black, hair line|
|Case:||Steel plate, black|
|Dimensions:||420 (W) x 107.7 (H) x 367 (D) mm|
|Accessory:||Power cord x1, Terminal block cover x 1, Terminal block cover mounting screw x 2|
Option: Rack mounting bracket: MB-25B
Volume control cover: YA-920
PORTALOOP - Discontinued
They are ideal for use in large prestigious applications such as theatres, churches, cathedrals, cinemas, large conference halls, etc., where first class sound and unrivalled reliability are a must.
Each amplifier includes one balanced microphone input and one switchable mic/line level input.
The pre-amplification stage of each amplifier utilises an advanced signal processing system that allows tight control over the audio signal without any degradation of output quality.
A metal compensation control is also provided to help offset the frequency response problems associated with the excessive metal content of some rooms.
Attractive free-standing design (optional wall and 19" rack-mounting kits available)
Coverage Square room 200m2 - Rectangular room 240m2
Two XLR 3 pin input sockets - one balanced mic. and one mic/line, both with 11V phantom power
'Outreach' input allows the connection of up to 10 additional mic. or line level inputs via a series of separately available single gang connector plates.
Adjustable drive control allows the loop current to be adjusted to suit a room's characteristics.
Metal compensation control helps offset the frequency response problems associated with excessive metal in a building.
3.5mm headphone socket allows true monitoring of the output signal
All models designed to meet or exceed the requirements of BS7594 and EN60118-4 when correctly installed
Listenor PRO Amplifier System
The microphone of Listenor Pro can be placed in a raised position on a nearby surface using the belt clip, or held in the hand and pointed towards the sound source.
There are a number of optional accessories listed below which can help those everyday listening requirements: headphones or an inductive loop for use with telecoil-equipped hearing aids, the Listenor Pro telephone kit provides cables to connect to landline telephones for home or office use. Listenor Pro amplifies the caller’s voice and you can continue to speak using the telephone handset.
Audio cables are available for connection to the headset socket on radio, computer, MP3 or iPod, or CD players and television and extension cables are also available.
To use Listenor Pro in meetings, classrooms or lecture halls where you need to focus on the speaker’s voice a Conversor directional microphone can be plugged into the microphone socket of Listenor Pro.
For note-taking applications in educational and workplace situations, Listenor Pro can be used with Conversor Pro Recorder for recording and playing back the lecture or discussion, and then uploading the recording to your PC for subsequent editing and filing.
Listenor Pro amplified listener
Two AAA batteries
Detachable belt clip